2 list of control panel messages, 1 normal state messages, 2 caution messages – Konica Minolta Magicolor 5440 DL User Manual

Page 109: List of control panel messages -6, Normal state messages -6, Caution messages -6

Advertising
background image

Description of the Control Panel (magicolor 5430 DL /5440 DL)

Main Unit Field Service

3-6

III

Ad

just

men

t/Set

ting

3.2

List of Control Panel Messages

NOTE
• When two or more messages are to be displayed, the message with the higher pri-

ority will be displayed.

• When a message concerning Consumables/Periodic Replacement Parts (Units) is

displayed, print a “CONFIG PAGE” from the “SPECIAL/PRINT CONFIG PAGE”
menu and check the status of the other consumables, too.

“4.2.1 PRINT CONFIG PAGE” 3-13

3.2.1

Normal state messages

• Normal state messages are displayed on the upper line of the LCD.

3.2.2

Caution messages

• Caution messages are displayed on the lower line of the LCD.

*: The lower the message in the above list, the higher the priority.

Message

Description

READY

• Print enabled.

PROCESSING

• Print data processing.

PRINTING

• Data being printed.

WARMING UP

• During warmup.

CALIBRATING

• Color shift correction in progress.

ENERGY SAVER

• Machine in Energy Saver mode; returns to normal mode within 35 seconds

after print data is received.

CANCELING JOB

• Job canceled.

Message

Description

UNSUPPORTED DIMM

• DIMM currently installed is not supported.

TRAY 1 EMPTY

• No media in Tray 1

TRAY 2 EMPTY

• No media in Tray 2 (only when a Lower Feeder Unit is installed)

TRAY 3 EMPTY

• No media in Tray 3 (only when a Lower Feeder Unit is installed)

FUSER LIFE LOW

• Fusing Unit needs replacement soon.

TRANS.ROLLER LOW

• Transfer Roller needs replacement soon.

TRANSFER LOW

• Transfer Belt Unit needs replacement soon.

FUSER LIFE END

• Fusing Unit service life has been reached.

TRANS.ROLLER END

• Transfer Roller service life has been reached.

TRANSFER END

• Transfer Belt Unit service life has been reached.

WASTE:NEAR FULL

• Waste Toner Bottle needs replacement soon.

X TONER LOW

• The specified color toner needs replacement soon.

SIZE MISMATCH

• Media of the size specified in the driver is not loaded in any Tray.
• Media of a size not specified in the driver is loaded in the Tray.

5450_E.book_PDF.book 6 ページ 2005年4月12日 火曜日 午後12時54分

Advertising