Konica Minolta Magicolor 5440 DL - Manual (Page 87)

Other Main Unit Field Service
2-50
II Main
tena
nce
4.4.26 Fusing Motor (M4)
1. Remove PWB Box/1.
☞ 2-47
2.
Remove PWB Box/2.
☞ 2-48
3.
Disconnect the connector [1], and
remove four screws [2] and the Fus-
ing Motor [3].
NOTE
• When installing the Fusing Motor,
try to insert it straight, and take
care not to damage the gears.
4.4.27 Intermediate Transport Motor (M3)
1. Remove PWB Box/1.
☞ 2-47
2.
Remove PWB Box/2.
☞ 2-48
3.
Disconnect the connector [1], and
remove four screws [2] and the Inter-
mediate Transport Motor [3].
NOTE
• When installing the Intermediate
Transport Motor, try to insert it
straight, and take care not to dam-
age the gears.
4.4.28 Synchronizing Roller Clutch (CL2)
1. Open the Right Door.
2. Remove the bearing [1].
Precautions for Reinstallation
• When reinstalling the bearing, make
sure that the rib on the inside of the
bearing faces as shown in the illus-
tration on the left.
[1]
[2]
[3]
4138fs2030c0
[1]
[2]
[3]
4138fs2031c0
[1]
4138fs2032c1
5450_E.book_PDF.book 50 ページ ２００５年４月１２日 火曜日 午後１２時５４分