Konica Minolta Magicolor 5440 DL - Manual (Page 183)

Service Menu (magicolor 5450) Main Unit Field Service
3-80
III
Ad
just
men
t/Set
ting
8.3 Service Menu Setting/Adjustment
8.3.1 SERIAL NUMBER
8.3.2 FIRMWARE VERSION
8.3.3 ALIGNMENT
A. TOP ADJUSTMENT
Function • Displays the serial number of the printer.
Use • To determine the printer’s serial number.
Setting
/procedure 1. Select “SERVICE MENU” and press the MENU/SELECT key.
2. Select “SERIAL NUMBER” and press the MENU/SELECT key.
3. “SERIAL NUMBER” is displayed.
Function • Displays the version number of the printer firmware.
Use • To determine the version number of the printer firmware.
Setting
/procedure CONTROLLER F/W: Firmware of controller
ENGINE F/W: Firmware of engine
BOOT/F/W: Boot firmware
1. Select “FIRMWARE VERSION” and press the MENU/SELECT key.
2. Select “Desired firmware” and press the MENU/SELECT key.
3. Version number of firmware is displayed.
Function • Adjusts the top margin of media for single-sided printing.
Use • To correct a misaligned print image.
Setting
/procedure PLAIN PAPER: Adjust the head margin of plain paper.
THICK PAPER: Adjust the head margin of thick paper.
ENVELOPE: Adjust the head margin of envelope.
TRANSPARENCY: Adjust the head margin of transparency.
1. Select “ALIGNET” and press the MENU/SELECT key.
2. Select “TOP ADJUSTMENT” and press the MENU/SELECT key.
3. Select “Desired paper type” and press the MENU/SELECT key.
4. Select “Desired adjustment amount” with the Up key
U/Down keyV and press the
MENU/SELECT key.
• The default setting is “0.”
“-15” to “+15”. (31 steps)
5450_E.book_PDF.book 80 ページ ２００５年４月１２日 火曜日 午後１２時５４分