2 replacing the transfer belt unit, Replacing the transfer belt unit -16 – Konica Minolta Magicolor 5440 DL User Manual
Page 53
Advertising
Periodic Check
Main Unit Field Service
2-16
II Main
tena
nce
1.6.2
Replacing the Transfer Belt Unit
A. Replacement Procedure
1.
Turn OFF the Power Switch.
2.
Open the Front Door.
3.
Slide out the Toner Cartridge [1] and
Waste Toner Bottle [2] about 10 cm.
4.
Open the Right Door.
5.
Loosen two screws [3] and unlock
the Transfer Belt Unit.
6.
Remove the Left Cover.
☞ 2-31
7.
Slide out the Transfer Belt Unit [4].
4138fs2515c0
[2]
[1]
[1]
4138fs2516c0
[3]
[3]
4138fs2517c0
[4]
5450_E.book_PDF.book 16 ページ 2005年4月12日 火曜日 午後12時54分
Advertising