Konica Minolta Magicolor 5440 DL - Manual (Page 131)

Description of the Control Panel (magicolor 5450) Main Unit Field Service
3-28
III
Ad
just
men
t/Set
ting
6.1.3 Normal messages
The Basic Screen is displayed after warmup has been completed.
The “READY LED
” lights up while the message is displayed.
A. Toner-remaining level gauge
• The amount of each color of toner remaining is graphed in 10% increments (11 scales.)
However, it's not displayed during the following states:
- Operator Call
- Service Call
- Menu
- Help menu
- BOOT message
- When the toner remaining amount is not determined immediately after startup.
Display Description
LCD 1 Printer mode is displayed. (Normally, “READY” is displayed.)
LCD 2
The message is displayed. (Normally, no message is displayed.)
LCD 3
LCD 4
Key guidance is displayed.
• Normally “MENU to enter” is displayed.
When the MENU key is pressed, the panel displays the MENU screen.
• When a WARNING message is displayed, “ V for help” is also displayed.
When the Down key V is pressed, the panel displays the HELP screen.
4138F3E007DA
YMCK
/'07
READY
to enter YMCK
State
Message
Key guidance
Toner-remaining
level gauge
Toner-remaining amount
100% (Full)
Toner-remaining amount
0% (Empty)
Toner color display
5450_E.book_PDF.book 28 ページ ２００５年４月１２日 火曜日 午後１２時５４分