Konica Minolta Magicolor 5440 DL - Manual (Page 185)

Service Menu (magicolor 5450) Main Unit Field Service
3-82
III
Ad
just
men
t/Set
ting
D. TRANSFER POWER /SIMPLEX PASS
E. TRANSFER POWER /DUPLEX PASS
Function • Adjusts the transfer power when single-sided pages have image quality problems
(void areas or white spots).
Use • To correct single-sided pages with image quality problems (void areas or white spots)
due to the characteristics of the media being used.
Setting
/procedure PLAIN PAPER: Adjust the image quality (void areas, white spot) of plain paper.
TRANSPARENCY: Adjust the image quality (void areas, white spot) of OHP film.
THICK 1: Adjust the image quality (void areas, white spot) of thick paper 1.
THICK 2: Adjust the image quality (void areas, white spot) of thick paper 2.
POSTCARD: Adjust the image quality (void areas, white spot) of postcard.
ENVELOPE: Adjust the image quality (void areas, white spot) of envelope.
• If void areas occurs, adjust in the plus levels.
• If white spots occurs, adjust in the minus levels.
1. Select “TRANSFER POWER” and press the MENU/SELECT key.
2. Select “SIMPLEX PASS” and press the MENU/SELECT key.
3. Select “Desired paper type” and press the MENU/SELECT key.
4. Select “Desired adjustment amount” with the Up key
U/Down keyV and press the
MENU/SELECT key.
• The default setting is “0.”
“-8” to “+7” (16 steps)
Function • Adjusts the transfer power when double-sided pages have image quality problems
(void areas or white spots).
Use • To correct double-sided pages with image quality problems (void areas or white
spots) due to the characteristics of the media being used.
Setting
/procedure PLAIN PAPER: Adjust the image quality (void areas, white spot) of plain paper.
• If void areas occurs, adjust in the plus levels.
• If white spots occurs, adjust in the minus levels.
1. Select “TRANSFER POWER” and press the MENU/SELECT key.
2. Select “DUPLEX PASS” and press the MENU/SELECT key.
3. Check if “PLAIN PAPER” is displayed and press the MENU/SELECT key.
4. Select “Desired adjustment amount” with the Up key
U/Down keyV and press the
MENU/SELECT key.
• The default setting is “0.”
“-8” to “+7” (16 steps)
5450_E.book_PDF.book 82 ページ ２００５年４月１２日 火曜日 午後１２時５４分