Konica Minolta Magicolor 5440 DL - Manual (Page 175)

Menu (magicolor 5450) Main Unit Field Service
3-72
III
Ad
just
men
t/Set
ting
7.7.12 CLOCK
A. DATE
B. TIME
7.7.13 HDD FORMAT
Function • Sets the date of the printer’s built-in clock.
Use • To change the date of the printer’s built-in clock.
Setting
/procedure DATE (DD.MM.YY): For Europe
DATE (MM.DD.YY): For North America
DATE(YY.MM.DD): For Japan
The following shows how to set DATE (DD.MM.YY).
1. Select “CLOCK” and press the MENU/SELECT key.
2. Select “DATE (DD.MM.YY)” and press the MENU/SELECT key.
3. Set “Date” with the Up key
U/Down keyV and press the Right keyZ.
4. Repeat the above procedures to set “Month” and “Year.”
5. Press the MENU/SELECT key.
DD: “01” to “31”.
MM: “01” to “12”.
YY: “2004” to “2032”.
Function • Sets the time of the printer’s built-in clock.
Use • To change the time of the printer’s built-in clock.
Setting
/procedure 1. Select “CLOCK” and press the MENU/SELECT key.
2. Select “TIME” and press the MENU/SELECT key.
3. Set “Hour” with the Up key
U/Down keyV and press the Right keyZ.
4. Repeat the above procedures to set “Minute.”
5. Press the MENU/SELECT key.
Function • Initializes the format of the optional Hard Disk unit.
Use • To initialize the format of the optional Hard Disk unit.
Setting
/procedure USER AREA ONLY: Initialize only user area.
ALL: Initialize all area
1. Select “HDD FORMAT” and press the MENU/SELECT key.
2. Select “Desired initialization method” and press the MENU/SELECT key.
3. “ARE YOU SURE?” is displayed.
4. By pressing the MENU/SELECT key, initialization starts. By pressing the CANCEL
key without pressing the MENU/SELECT key, the start of initialization can be can-
celled.
5. The printer restarts and the hard disk is initialized. Once the initialization starts, it
cannot be cancelled.
• The default setting is “USER AREA ONLY.”
USER AREA ONLY ALL
NOTE
• This menu is available only when an optional Hard Disk unit is installed.
5450_E.book_PDF.book 72 ページ ２００５年４月１２日 火曜日 午後１２時５４分