Konica Minolta Magicolor 5440 DL - Manual (Page 73)

Other Main Unit Field Service
2-36
II Main
tena
nce
7. Remove five screws [7] and the Print
Control Board [8].
NOTE
• When the Print Control Board is
replaced, upgrade the Firmware to
the latest version.
☞ 2-21
8.
Remove three screws and the inter-
face protective cover [4].
4.4.11 Print Control Board (PWB-P) (magicolor 5450)
1. Remove the Rear Cover.
☞ 2-31
2.
Remove seven screws [1] and the
Print Control Board protective shield
[2].
3. Remove the Left Cover.
☞ 2-31
4.
Remove four screws [3].
[7]
[8]
4138fs2070c1
4138fs2534c0
[1]
[1]
[1]
[2]
4138fs2535c1
[3]
[3]
[4]
5450_E.book_PDF.book 36 ページ ２００５年４月１２日 火曜日 午後１２時５４分