Konica Minolta Magicolor 5440 DL - Manual (Page 168)

Main Unit Field Service Menu (magicolor 5450)
3-65
III
Ad
just
men
t/Set
ting
F. PCL /LINES PER PAGE
G. PCL /FONT SOURCE /FONT NUMBER
H. PCL /FONT SOURCE /PITCH SIZE
Function • Sets the lines per page for PCL printing.
Use • To set the number of lines to be printed per page for PCL jobs.
Setting
/procedure 1. Select “EMULATION” and press the MENU/SELECT key.
2. Select “PCL” and press the MENU/SELECT key.
3. Select “LINES PER PAGE” and press the MENU/SELECT key.
4. Select “Desired line number” with the Up key
U/Down keyV and press the MENU/
SELECT key.
• The default setting is “60” lines.
“5” lines to “128” lines.
Function • Sets the PCL font to be used for PCL printing.
Use • To set the font to be used for printing PCL jobs.
Setting
/procedure 1. Select “EMULATION” and press the MENU/SELECT key.
2. Select “PCL” and press the MENU/SELECT key.
3. Select “FONT SOURCE” and press the MENU/SELECT key.
4. Select “FONT NUMBER” and press the MENU/SELECT key.
5. Select “Desired font” with the Up key
U/Down keyV and press the MENU/SELECT
key.
• The default setting is “0”.
“0” to “102”.
NOTE
• According to the selected “FONT NUMBER”, “PITCH SIZE” or “POINT SIZE”
setting is available.
Function • Sets the pitch size of the PCL font for PCL printing.
Use • To set the pitch size of the font to be used for printing PCL jobs.
Setting
/procedure 1. Select “EMULATION” and press the MENU/SELECT key.
2. Select “PCL” and press the MENU/SELECT key.
3. Select “FONT SOURCE” and press the MENU/SELECT key.
4. Select “PITCH SIZE” and press the MENU/SELECT key.
5. Select “Desired pitch size” with the Up key
U/Down keyV and press the MENU/
SELECT key.
• The default setting is “10.00” pt.
“0.44” pt to “99.99” pt.
NOTE
• When one of the following “FONT NUMBERs” is selected, “PITCH SIZE” set-
ting is available.
FONT NUMBER: 0 to 5, 21 to 23, 54 to 57, 81, 82.
5450_E.book_PDF.book 65 ページ ２００５年４月１２日 火曜日 午後１２時５４分