Konica Minolta Magicolor 5440 DL - Manual (Page 90)

Main Unit Field Service Other
2-53
II Main
tena
nce
9. Snap off the C-clip [8], and remove
the bearing [9] and the Pressure/
Retraction Clutch/2nd Image Trans-
fer [10].
Precautions for Reinstallation
• When reinstalling the bearing and
Pressure/Retraction Clutch/2nd
Image Transfer, make sure that the
protrusion [11] on the Pressure/
Retraction Clutch/2nd Image Trans-
fer fits into the locking slot [12].
4.4.30 Pressure/Retraction Clutch /1st Image Transfer (CL4)
1. Remove PWB Box/1.
☞ 2-47
2.
Remove PWB Box/2
☞ 2-48
3.
Disconnect the connector [1],
remove three screws [2], and pull out
the Pressure/Retraction Clutch/1st
Image Transfer Assy [3].
4. Snap off the E-ring [4], and remove
the bearing [5] and the Pressure/
Retraction Clutch/1st Image Trans-
fer [6].
[10] [11]
[12]
[9]
[8]
[7]
4138fs2536c1
[1]
[2]
[3]
4138fs2040c0
[4]
[5]
[6]
4138fs2041c0
5450_E.book_PDF.book 53 ページ ２００５年４月１２日 火曜日 午後１２時５４分