Konica Minolta Magicolor 5440 DL - Manual (Page 45)

Periodic Check Main Unit Field Service
2-8
II Main
tena
nce
6. Press two pins [3] in, and lift the
Feed Roller Cover [4] upward to
remove it.
NOTE
Make sure that the bearing goes all
the way into both of [5] shown on the
left when installing the Feed Roller
Cover.
7. Using a soft cloth dampened with
alcohol, wipe the Feed Roller [6]
clean of dirt.
B. Replacement Procedure
1.
Remove the Manual Feed Tray. (See
Cleaning procedure 1 to 5)
2. Remove the Feed Roller Cover (See
Cleaning procedure 6)
3. Remove the two screws [7].
4. Remove the Cover [8].
[3]
[4]
4138fs5508c0
4138fs2547c0
[5]
[6]
4138fs5509c0
[7]
[7]
[8]
4138fs5510c0
5450_E.book_PDF.book 8 ページ ２００５年４月１２日 火曜日 午後１２時５４分