Konica Minolta Magicolor 5440 DL - Manual (Page 160)

Main Unit Field Service Menu (magicolor 5450)
3-57
III
Ad
just
men
t/Set
ting
7.5.8 CALIBRATION
A. TONE CALIBRATION
B. AIDC PROCESS
7.5.9 COLOR SEPARATION
Function • Sets the gradation adjustment (Image stabilization with the controller).
Use • To use for a CCD malfunction or a particular calibration made by users.
Setting
/procedure ON: Gradation adjustment is ON.
OFF: Gradation adjustment is OFF.
1. Select “CALIBRATION” and press the MENU/SELECT key.
2. Select “TONE CALIBRATION” and press the MENU/SELECT key.
3. Select “Desired setting” and press the MENU/SELECT key.
• The default setting is “ON.”
ON OFF
Function • Controls the image stability.
Use • To be used to adjust image quality.
• To be used when the Transfer Belt unit and/or the Transfer roller are replaced.
Setting
/procedure 1. Select “CALIBRATION” and press the MENU/SELECT key.
2. Select “AIDC PROCESS” and press the MENU/SELECT key.
3. Select “EXCUTE” and press the MENU/SELECT key.
4. Image stable control is set and after completion the screen returns to the default.
• The default setting is “CANCEL.”
EXCUTE CANCEL
Function • Sets the color separation function.
Use • To create color separations.
Setting
/procedure 1. Select “COLOR SEPARATION” and press the MENU/SELECT key.
2. Select “Desired setting” and press the MENU/SELECT key.
• The default setting is “ON.”
ON OFF
5450_E.book_PDF.book 57 ページ ２００５年４月１２日 火曜日 午後１２時５４分