Mechanical adjustment, 1 registration adjustment, Mechanical adjustment -2 – Konica Minolta Magicolor 5440 DL User Manual
Page 260: Registration adjustment -2
Advertising
Mechanical Adjustment
Lower Feeder Unit Field Service Ver. 2.0 April 2005
3-2
III
Ad
just
men
t/Set
ting
2.
Mechanical Adjustment
2.1
Registration adjustment
This adjustment must be made if:
• The printed image deviates in the CD direction.
1.
Remove the tray.
2.
Loosen two screws [1].
3.
Loosen two screws [2].
4.
Watching the graduations [3] on the
adjusting plate, move the Edge
Guide Plate [4] as necessary.
Adjustment range:
±
2.0 mm
5.
Tighten the four screws that have
been loosened and mount the tray.
[1]
4537fs3501c0
[2]
[2]
4537fs3502c0
[3]
[4]
5450_E.book_PDF.book 2 ページ 2005年4月12日 火曜日 午後12時54分
Advertising