Konica Minolta Magicolor 5440 DL User Manual
Page 198
Main Unit Field Service
Malfunction code
4-11
IV
T
roub
lshoo
t
in
g
0521H
Abnormally high Fusing Pressure
Roller temperature
• The temperature detected by the Fusing Pressure
Roller Thermistor remains higher than the specified
value for a given period of time or longer.
13D0H Parameter Chip failure
• Data, which has been written, is read, checked, and
found faulty; rewriting of the data is then executed and
the data is checked to be found faulty during re-read-
ing.
• A count value is found faulty during reading.
• Parameter Chip is detected to be not mounted during
initial mounting detecting sequence.
• Found to be access failure.
13E2H Flash ROM write error
• Flash ROM writing is found faulty during a check.
13E3H Flash ROM device fault
• An erase error occurs during erasing of data in Flash
ROM.
Code
Item
Detection Timing
5450_E.book_PDF.book 11 ページ 2005年4月12日 火曜日 午後12時54分