Konica Minolta Magicolor 5440 DL - Manual (Page 52)

Main Unit Field Service Periodic Check
2-15
II Main
tena
nce
1.6 Replacing Units
1.6.1 Replacing the Transfer Roller
A. Replacement Procedure
1.
Open the Right Door.
2. Press the locks [2] located at the
front and rear ends of the Transfer
Roller [1] inward to unlock the Trans-
fer Roller [1].
3. Holding the levers, remove the
Transfer Roller [3].
4. To reinstall, reverse the order of
removal.
5. Replacing the Ozone Filter.
☞ 2-10
6.
From the Menu, select ENGINE →
ENGINE SERVICE → RESET
COUNTER TRANSFER ROLLER.
Execute this function to reset the
Transfer Unit counter value. (magi-
color 5430 DL/5440 DL)
☞ For details, see “III. Adjustment/
Setting.”
7. From the Menu, select From the
Menu, select QUALITY MENU
→
SUPPLIES → REPLACE → TRANS.
ROLLER. Execute this function to
reset the Transfer Unit counter value.
(magicolor 5450)
☞ For details, see “III. Adjustment/
Setting.”
8. From the Menu, select ENGINE →
ENGINE SERVICE → COLOR CAR-
IBRATION and execute this function.
(magicolor 5430 DL/5440 DL)
☞ For details, see “III. Adjustment/
Setting.”
9. From the Menu, select QUALITY
MENU
→ CARIBRATION → AIDC
PROCESS and execute this func-
tion. (magicolor 5450)
☞ For details, see “III. Adjustment/Set-
ting.”
4138fs2513c0
[2]
[2]
[1]
4138fs2514c0
[3]
5450_E.book_PDF.book 15 ページ ２００５年４月１２日 火曜日 午後１２時５４分