Konica Minolta Magicolor 5440 DL - Manual (Page 88)

Main Unit Field Service Other
2-51
II Main
tena
nce
3. Disconnect the connector [2] and
remove the Synchronizing Roller
Clutch [3].
Precautions for Reinstallation
• When reinstalling the Synchroniz-
ing Roller Clutch, make sure that
the protrusion [4] on the Synchro-
nizing Roller Clutch fits into the
locking slot [5].
4.4.29 Pressure/Retraction Clutch /2nd Image Transfer (CL5)
1. Open the Front Door.
2. Remove the Right Front Cover.
☞ 2-30
3.
Open the Right Door.
4. Remove five screws [1] and the con-
nector cover [2].
5. Disconnect six connectors.
[3]
[4]
[5]
[2]
4138fs2034c0
[1]
[2]
[1]
4138fs2035c0
4138fs2036c0
5450_E.book_PDF.book 51 ページ ２００５年４月１２日 火曜日 午後１２時５４分