Konica Minolta Magicolor 5440 DL User Manual
Page 46
Advertising
Main Unit Field Service
Periodic Check
2-9
II Main
tena
nce
5.
Snap off C-clip [8] and remove the
bearing [9] at the front.
6.
Snap off the C-clip [10] and then
remove the Clutch [11] and the Feed
Roller [12].
NOTE
• When reinstalling the Feed Roller
and the Clutch, make sure that it is
mounted in the direction shown in
the illustration on the left.
[8]
[9]
4138fs5511c0
[10]
[11]
[12]
4138fs5512c0
4138fs2546c0
5450_E.book_PDF.book 9 ページ 2005年4月12日 火曜日 午後12時54分
Advertising