Konica Minolta Magicolor 5440 DL - Manual (Page 121)

Menu (magicolor 5430 DL /5440 DL) Main Unit Field Service
3-18
III
Ad
just
men
t/Set
ting
4.5.4 GATEWAY
4.5.5 MAC ADDRESS
4.5.6 HTTP
4.5.7 SNMP
4.5.8 FORCED MODES
Function • Sets the gateway address of the printer on the network.
Use • To enter the printer’s gateway address.
Setting/
procedure • Enter the gateway address using the up, down, right, and left arrow keys.
• The default setting is “192.168.1.1.”
NOTE
• Before manually setting the gateway address, turn OFF DHCP and BOOTP.
Function • Displays the Ethernet hardware address of the printer.
Use • To display the printer’s Ethernet hardware address.
Setting
/procedure
• The address is displayed only and cannot be altered.
Function • Specifies whether to access PageScope Web Connection and to use the IPP proto-
col or not.
Use • To specify whether to use IPP and access PageScope Web Connection.
Setting
/procedure • The machine must be restarted after the setting has been changed.
• The default setting is “ON.”
ON OFF
Function • Specifies whether to use the SNMP protocol or not.
Use • To specify whether to use SNMP.
Setting
/procedure • The machine must be restarted after the setting has been changed.
• The default setting is “ON.”
ON OFF
Function • Sets the network speed, duplex mode, and negotiation of the printer used on the
network.
Use • To set the printer’s network speed, duplex mode, and negotiation.
Setting
/procedure • Settings
Network speed (SPEED): AUTO, 100Mbps, 10Mbps
Duplex mode (DUP): AUTO, Full-duplex mode, Half-duplex mode
Negotiation (NEG.): ON, OFF
• The default setting is “AUTO/AUTO/ON.”
AUTO/ AUTO/ ON AUTO/ FULL/ ON AUTO/ HALF/ ON 100M/ AUTO/ ON
100M/ FULL/ ON 100M/ FULL/ OFF 100M/ HALF/ ON 100M/ HALF/ OFF
10M/ AUTO/ ON 10M/ FULL/ ON 10M/ FULL/ OFF 10M/ HALF/ ON
10M/ HALF/ OFF
5450_E.book_PDF.book 18 ページ ２００５年４月１２日 火曜日 午後１２時５４分