Konica Minolta Magicolor 5440 DL - Manual (Page 125)

Service Mode (magicolor 5430 DL/5440 DL) Main Unit Field Service
3-22
III
Ad
just
men
t/Set
ting
5.3 Settings/Adjustments in Service/Service Person Mode
Functions
5.3.1 RESTORE FACTORY DEFAULT
Function • Reinitializes the settings to their factory defaults.
Use • To return the current settings to the factory default settings.
• Use this as the last resort before replacing the board when taking remedial steps for
a malfunction.
• The following table lists the items to be reinitialized and their default values.
NOTE
• Some items can be reset after being reinitialized while others cannot be.
A. Items that cannot be reset after reinitialization
*1: When the Duplex Option is installed
Item Factory Default Value Ref. Page
Counter:
Main Unit
Color 0 -
B/W 0 -
Total 0 -
Counter:
Duplex *1
Color 0 -
B/W 0 -
Total 0 -
Amount of toner still available
for use in each Toner Cartridge
100% -
Transfer Roller use rate 0% -
Transfer Belt use rate 0% -
Fusing Unit use rate 0% -
Waste Toner Bottle use rate 0% -
Counter:Transfer Roller 0 -
Counter:Transfer Belt Unit 0 -
Counter:Fusing Unit 0 -
5450_E.book_PDF.book 22 ページ ２００５年４月１２日 火曜日 午後１２時５４分