5 maintenance procedure (periodic parts check), 1 feed roller (tray 1), Maintenance procedure (periodic parts check) -6 – Konica Minolta Magicolor 5440 DL User Manual
Page 43: Feed roller (tray 1) -6
Periodic Check
Main Unit Field Service
2-6
II Main
tena
nce
1.5
Maintenance Procedure (Periodic Parts Check)
NOTE
• The alcohol referred to in the following procedures is isopropyl alcohol.
• Be sure to note that the feed trays are named differently depending upon the
printer model.
• The following procedures use the magicolor 5430 DL/5440 DL tray names.
1.5.1
Feed Roller (Tray 1)
A. Cleaning Procedure
1.
Slide out Tray 1.
2.
Using a soft cloth dampened with
alcohol, wipe the Feed Roller [1]
clean of dirt.
B. Replacement Procedure
1.
Slide out Tray 1.
2.
Lock the Paper Lift Plate [1].
3.
Snap off two C-clips [2] and remove
the bearing [3] at the front.
4.
Snap off the C-clip [4] and remove
the Feed Roller [5].
magicolor 5430 DL / 5440 DL
magicolor 5450
MANUAL FEED TRAY
TRAY 1
TRAY 1
TRAY 2
4138fs2520c0
[1]
[1]
[2]
[3]
[2]
4138fs2001c1
[4]
[5]
4138fs2002c1
5450_E.book_PDF.book 6 ページ 2005年4月12日 火曜日 午後12時54分