Konica Minolta Magicolor 5440 DL - Manual (Page 157)

Menu (magicolor 5450) Main Unit Field Service
3-54
III
Ad
just
men
t/Set
ting
7.5.5 IMAGE PRINTING
A. RGB COLOR
B. RGB INTENT
C. RGB GRAY
Function • Sets the RGB color space of the image to be printed.
Use • To set the input RGB color space that is used for printing the image (picture).
Setting
/procedure sRGB...BlueAdjustRGB: Profile that has been preset to the printer.
Custom Profile: Custom profile that has been downloaded to the printer by user.
1. Select “IMAGE PRINTING” and press the MENU/SELECT key.
2. Select “Desired RGB color space” and press the MENU/SELECT key.
• The default setting is “sRGB.”
DEVICE COLOR /sRGB /AppleRGB /AdobeRGB1998 /ColorMatchRGB /BlueAdjus-
tRGB /Custom Profile...
Function • Sets the RGB characteristics of the image to be printed.
Use • To set the color conversion characteristic from input RGB to device CMYK that is
used for printing the image (picture).
Setting
/procedure Vivid: Color conversion characteristic suited to the image emphasizing on color vivid-
ness.
Photographic: Color conversion characteristic suited to the image emphasizing on color
image.
Relative color: Reproduce the color that minimize the color difference between original
and print by adjusting the basic color (white.)
Absolute color: Reproduce the color that maintains the absolute color within the device
reproduced color.
1. Select “IMAGE PRINTING” and press the MENU/SELECT key.
2. Select “RGB INTENT” and press the MENU/SELECT key.
3. Select “Desired color characteristic” and press the MENU/SELECT key.
• The default setting is “PHOTOGRAPHIC.”
VIVID PHOTOGRAPHIC RELATIVE ABSOLUTE COLOR
Function • Sets the RGB gray reproduction of the image to be printed.
Use • To set the gray print method that is processed by the printer for the printed image
(picture).
Setting
/procedure Composite black: Print gray with the toner of 4 colors CMYK.
Black and gray: Print black (R=G=B=0) only with K toner and print gray with toner of 4
colors CMYK.
Black only: Print gray only with K toner.
1. Select “IMAGE PRINTING” and press the MENU/SELECT key.
2. Select “RGB GRAY” and press the MENU/SELECT key.
3. Select “Desired color characteristic” and press the MENU/SELECT key.
• The default setting is “COMPOSITE BLACK.”
COMPOSITE BLACK BLACK AND GRAY BLACK ONLY
5450_E.book_PDF.book 54 ページ ２００５年４月１２日 火曜日 午後１２時５４分