Konica Minolta Magicolor 5440 DL - Manual (Page 166)

Main Unit Field Service Menu (magicolor 5450)
3-63
III
Ad
just
men
t/Set
ting
7.7 SYS DEFAULT MENU
7.7.1 LANGUAGE
7.7.2 EMULATION
A. DEF. EMULATION
B. POSTSCRIPT /WAIT TIMEOUT
Function • Sets the language of the Control Panel display.
Use • To set the language used in the Menu.
Setting
/procedure 1. Select “LANGUAGE” and press the MENU/SELECT key.
2. Select “Desired LANGUAGE” and press the MENU/SELECT key.
For Japan
• The default setting is “JAPANESE.”
For all other areas
• The default setting is “ENGLISH.”
ENGLISH* / FRANCH / GERMAN / SPANISH / ITALIAN / PORTUGUESE
/ CZECH / JAPANEASE* / KOREAN / CHINESE (SHIMPLIFIELD)
/ CHINESE (TRADITIONAL)
Function • Sets the default printer language.
Use • To set the default printer language.
Setting
/procedure 1. Select “EMULATION” and press the MENU/SELECT key.
2. Select “DEF.EMULATION” and press the MENU/SELECT key.
3. Select “Desired EMULATION” and press the MENU/SELECT key.
• The default setting is “AUTO.”
AUTO POSTSCRIPT PCL
Function • Sets the amount of time to wait for a PostScript file.
Use • To set the amount of time to wait for a PostScript file before the print job times out.
Setting
/procedure 1. Select “EMULATION” and press the MENU/SELECT key.
2. Select “POSTSCRIPT” and press the MENU/SELECT key.
3. Select “WAIT TIMEOUT” and press the MENU/SELECT key.
4. Select “Desired time” with the Up key
U/Down keyV and press the MENU/SELECT
key.
• The default setting is “0” seconds.
“0” seconds to “300” seconds.
5450_E.book_PDF.book 63 ページ ２００５年４月１２日 火曜日 午後１２時５４分