Konica Minolta Magicolor 5440 DL User Manual

Page 164

Advertising
background image

Main Unit Field Service

Menu (magicolor 5450)

3-61

III

Ad

just

men

t/Set

ting

E. TCP/IP / DHCP/BOOTP

F.

NETWARE

G. APPLETALK

Function

• DHCP: Automatically acquires an IP address from the DHCP server, if there is one

in the network, and specifies whether to load other network information.

• BOOTP: Automatically acquires an IP address from BOOTP and specifies whether to

load other network information.

Use

• To automatically acquire an IP address and load other network information.

Setting
/procedure

YES: Enable IP auto acquisition setting.
No: Disable IP auto acquisition setting.

1. Select “ETHERNET” and press the MENU/SELECT key.
2. Select “TCP/IP” and press the MENU/SELECT key.
3. Select “DHCP/BOOTP” and press the MENU/SELECT key.
4. Select “Desired setting” and press the MENU/SELECT key.

• The default setting is “YES.”

YES

NO

NOTE
• When “TCP/IP/IP ADDRESS” is enabled, the “DHCP/BOOTP” setting is

changed to “NO.”

• When “DHCP/BOOTP” is activated, “TCP/IP/IP ADDRESS” is set automatically

set within the range “169.254.0.0. to 169.254.255.255.”

Function

• Enables NetWare.

Use

• To specify that the printer is connected to a NetWare network.

Setting
/procedure

YES: Enable NetWare. Printing can be done via NetWare.
No: Disable NetWare. Printing cannot be done via NetWare.

1. Select “ETHERNET” and press the MENU/SELECT key.
2. Select “NETWARE” and press the MENU/SELECT key.
3. Select “ENABLE” and press the MENU/SELECT key.
4. Select “Desired setting” and press the MENU/SELECT key.

• The default setting is “YES.”

YES

NO

Function

• Enables AppleTalk.

Use

• To specify that the printer is connected to an AppleTalk network.

Setting
/procedure

YES: Enable AppleTalk. Printing can be done via AppleTalk.
No: Disable Apple Talk. Printing cannot be done via AppleTalk.

1. Select “ETHERNET” and press the MENU/SELECT key.
2. Select “APPLETALK” and press the MENU/SELECT key.
3. Select “ENABLE” and press the MENU/SELECT key.
4. Select “Desired setting” and press the MENU/SELECT key.

• The default setting is “YES.”

YES

NO

5450_E.book_PDF.book 61 ページ 2005年4月12日 火曜日 午後12時54分

Advertising