YSI IQ SensorNet 2020 XT Terminal - Manual (Page 123)

System 2020 XT USB Settings/setup
5 - 3 ba76019e01 12/2012
5.3 Terminal settings
The available terminal settings depend on the terminal installed. The
following terminals can be used:
 MIQ/TC 2020 XT
 Any further compatible terminals (see section 1.4)
(see respective component operating manual)
 MIQ/IF232 interface component with software terminal (see MIQ/
IF232 component operating manual)
The terminal settings at the MIQ/TC 2020 XT include:
 Terminal name, user-defined
 Illumination brightness
 Illumination brightness (standby)
 Display contrast

Network settings (if the MIQ/TC 2020 XT is configured as a
controller only)
Fig. 5-2 Terminal settings
1 Using <S>, open the Settings menu.
2 Using <
> and <OK>, select and confirm the menu
item, Terminal settings -> .
The Terminal settings display opens.