YSI IQ SensorNet 2020 XT Terminal - Manual (Page 132)

Settings/setup System 2020 XT USB
5 - 12 ba76019e01 12/2012
5.5 Editing the list of sensors
The Edit list of sensors display provides an overview of all IQ sensors,
differential sensors and inactive datasets (see section 7.4.2).
In the Edit list of sensors display, you can:
 assign sensor names (see section 5.5.1)
 delete inactive datasets (see section 5.5.1)
 change the order of the display of measured values on the
measured value display (see section 5.5.2).
5.5.1 Entering / editing a name for an IQ sensor
For the easier identification of the IQ sensors and differential sensors,
you can assign an individual name to each IQ sensor.
Fig. 5-5 Edit list of sensors
1 Using <S>, open the Settings menu.
2 Using <
> and <OK>, select and confirm the menu
item, System settings -> Edit list of sensors.
The Edit list of sensors display opens.
3 Using <
>, highlight the Sensor name column. Confirm
with <OK>.
4 Using, < > highlight the name of a sensor and confirm
with <OK>.
5 Enter the name with < > and <OK> and confirm with
<OK> (see section 5.5.1).