YSI IQ SensorNet 2020 XT Terminal - Manual (Page 97)

System 2020 XT USB Operation
4 - 19 ba76019e01 12/2012
4.4.5 Display of the measured values of a measurement location
or of all IQ sensors in the system
As soon as a terminal is docked onto a measurement location, the local
measured value display becomes active. The IQ sensors selected for
the measurement location appear on the measured value display (see
section 5.9).
Switch between the measured values for the measurement location
and all IQ sensors as follows:
1 Switch to the measured value display with <M>.
2 Using <OK>, open the Display/Options menu.
3 Using < >, select the menu item, Display local values
or all values and confirm with <OK>. The measured value
display switches between the display of the sensors at the
measurement location and all sensors.