B&K Precision 2552-2559 - Manual - Manual (Page 103)

103
there will be a message “Save data success” displayed on the
screen). Now the waveform data have been saved to the USB
flash drive.
Recall waveforms from USB flash drive, follow next steps:
1. Press the “SAVE/RECALL” button.
2. Press the “Type” button to select “Waveforms”.
3. Insert a USB flash drive to the front or rear USB host port of the
oscilloscope and wait until the oscilloscope has initialized USB
flash drive (within ten seconds).
4. Press the “Save to” option button to select “File”.
5. Press the “Save” option button then go into the Save/Recall
interface.
6. Choose the file you want then press the “Load” option button
(about five seconds, there be a message “Recall data success”
displayed on the screen). Now the waveform data have been
recalled from the USB flash drive.
Save Picture/Screenshot
The display screenshot can be saved to a USB flash drive, but they cannot
be recalled. Images can be opened on a computer.
Table 47 - Picture Storage Function Menu
Option Setting Description
Type Picture Select save screenshot.
Save Saves screenshot to USB flash drive.