B&K Precision 2552-2559 - Manual - Manual (Page 66)

66
Standard NTSC
Pal/Secam
Select the video standard for sync and
line number count.
Set up Enter the “Trigger Setup Menu”
Next Page Page 2/2
Enter the second page of Alternatetrigger
menu.
Table 27 - Set Trigger Mode to Slope Trigger Function Menu 1
Option Setting Description
Type Alternative The trigger signal comes from two vertical
channels when you use alternative trigger.
In this mode, you can observe two
irrelative signals at the same time.
Channels CHX-CHY Select any two channels from CH1, CH2,
*CH3, or *CH4 as the sources for
alternating trigger.
Source
CH1, CH2,
*CH3, *CH4 Selects the source channel.
Mode Slope
Set trigger type of the vertical channel
signal to slope trigger.
Next Page Page 1/2
Enter the second page of the alternate
trigger.
*Available for 4CH models only.
Table 28 - Set Trigger Mode to Slope Trigger Function Menu 2
Option Setting Description
When Select slope trigger condition.
Time
(Set time)
Turn the “Universal” knob to set the slope
time. Time setup range is 20ns-10s.