B&K Precision 2552-2559 - Manual - Manual (Page 86)

86
Figure 50 - Auto Mode
Auto Measurement
When you take automatic measurements, the oscilloscope does all the
calculation for you. The measurements use all the recorded points in the
memory, which are more accurate than measurements made using the
graticule lines or cursor measurements because these measurements are
confined to be made by only using points on the display and not all the data
points recorded by the oscilloscope.
Press the ‘MEASURE’ button for Automatic Test.
There are three auto measurement types: Voltage Measure, Time Measure,
and Delay Measure. There are a total of 32 measurement parameters.
Table 36 - Auto Measurement Function Menu 1
Option Description
Voltage Press this button to enter the Voltage measurement
menu.
Time Press this button to enter the Time measurement menu.
Delay Press this button to enter the Delay measurement menu.
All
Mea
Press this button to enter the All Measurement menu.
Return Press this option button to return to the home page of
the auto measurement menu.