B&K Precision 2552-2559 - Manual - Manual (Page 59)

59
2. Press the “Standard” option button to select “PAL/SECAM”
or “NTSC”.
Slope Trigger
Trigger on positive slope or negative slope according to setup time of the
oscilloscope.
Table 20 - Slope Trigger Function Menu 1
*Available for 4CH models only.
Option Setting Description
Type Slope Trigger on positive slope or
negative slope according to setup
time of the oscilloscope.
Source CH1
CH2
*CH3
*CH4
EXT
EXT/5
Select trigger source.
When Select trigger condition.
Time
< Set Time>
Turn the “Universal” knob to set
slope time. Time setup range is
20ns-10s.
Next Page Page 1/2 Enter the second page of slope
trigger menu.