B&K Precision 2552-2559 - Manual - Manual (Page 83)

83
Figure 48 - Cursor Menu
Track Mode
Table 34- Track Mode Function Menu
Option Setting Description
Cursor Mode Track In this mode, set track cursor measure.
Cursor A CH1
CH2
*CH3
*CH4
NONE
Set the input signal channel that the
Cursor A will measure.
Cursor B CH1
CH2
*CH3
*CH4
NONE
Set the input signal channel that the
Cursor B will measure.
Cur A Select this option, turn the “Universal”
knob to adjust horizontal coordinate of
Cursor A.
Cur B Select this option, turn the “Universal”
knob to adjust horizontal coordinate of
Cursor B.
*Available for 4CH models only.
In this mode, the screen displays two cross cursors. The cross cursor sets
the position on the waveform automatically. You could adjust the cursor’s