B&K Precision 2552-2559 - Manual - Manual (Page 62)

62
3. Press the “TRIG MENU” button to enter “Trigger menu”.
4. Press the “Type” option button to select “Slope”.
5. Press the “Source” option button to select “CH1”, “CH2”,
“CH3”, or “CH4”. (CH3 and CH4 available for 4CH
models only)
6. Press the “When” option button to select “ ”, “
”, “ ”, “ ”, “ ” or “
”.
7. Press the “Time” button and turn the “Universal” knob to
adjust slope time.
8. Press the “Next Page - Page 1/2” option button to enter the
second page of the “Slope trigger menu”.
9. Press the “Vertical” option button to select a trigger level
that can be adjusted.
10. Turn the “LEVEL” knob.
Alternate Trigger
The trigger signal comes from two vertical channels when you use
alternate trigger. In this mode, you can observe two unrelated signals at the
same time. You can select different trigger types for two vertical signals.
Different types include edge, pulse, video, and slope trigger. Trigger
information for both channels will display on the bottom right of the screen.
Figure 36 - Alternate Trigger Menu