B&K Precision 2552-2559 - Manual - Manual (Page 98)

98
• Save Setup to USB Flash Drive
Table 43 - Save Setup to USB Flash Drive Function Menu
Figure 58 - Save Setup Screen
Save Setup to USB Flash drive:
For example: Save setup that set waveform display type to “Dots” to USB
flash drive.
1. Press the “SAVE/RECALL” button to select “Setups”.
2. Insert USB flash drive to USB host port of the oscilloscope and
wait until the oscilloscope has initialized USB flash drive (about
five second).
3. Press the “Save to” option button to select “file”.
4. Press the “Save” option button to go into the Save/Recall
interface.
Option Setting Description
Type Setups Menu for the Storage/Recall settings.
Save to File Save setup data to USB flash drive.
Save Go to the Save/Recall interface