B&K Precision 2552-2559 - Manual - Manual (Page 78)

78
Operation Introduction:
Setup waveform display type
1. Press the “DISPLAY” button to enter the
“Display” menu.
2. Press the “Type” option button to select
“Vectors” or “Dots”.
Set up Persist
Press the “Persist” option button to select “Off”, “1
Sec”, “2 Sec”, “5 Sec” or “Infinite”. You can use this
option to observe some special waveforms.
Figure 47 - Persist Screen
Setup Intensity
Press the “Intensity” option button and turn the
“Universal” knob to adjust waveforms’ intensity.
Setup Brightness
Press the “Brightness” option button and turn the
“Universal” knob to adjust grid brightness.
Setup Display Format
1. Press the “Next Page” option button to enter
second display menu.
2. Press the “Format” option button to select “YT” or
“XY”
Setup Screen
Press the “Screen” option button to select “Normal” or
“Inverted” to set the screen display color.