B&K Precision 2552-2559 - Manual - Manual (Page 89)

89
*Available for 4CH models only.
Table 40 - All Measurement Function Menu
Option Setting Description
Source CH1
CH2
*CH3
*CH4
Select input signal channel.
Voltage On
Off
Turn on the all measurement function to
measure voltage parameters.
Turn of the all measurement function to
measure voltage parameters.
Time On
Off
Turn on the all measurement function to
measure Time parameters.
Turn of the all measurement function to
measure Time parameters.
Return Return to the “All Measurements main
menu”.
*Available for 4CH models only.
Table 41 – Types of Measurements
Return Return to the first page of auto
measurement menu.
Measure Type Description
Vpp
Measures the absolute difference between the
maximum and minimum peaks of the entire
waveform.
Vmax
The most positive peak voltage measured over
the entire waveform.
Vmin
The most negative peak voltage measured
over the entire waveform.
Vamp
Voltage between Vhig and Vlow of a
waveform.