B&K Precision 2552-2559 - Manual - Manual (Page 146)

146
Ch to Ch
Skew (both
channels in
same V/div
setting)
<2ns
(Equivalent
to 2 minor
divisions in
smallest
t/div)
<1ns
Math
operation
+, -, *, /, FFT
FFT Window mode: Hanning, Hamming, Blackman,
Rectangular
Sampling points: 1024
Bandwidth
Limited
20 MHz ± 40% (Note: BW limited below 20 MHz when
using probe in x1)
Common Specifications (all models)
***The number of data points depends on the timebase setting and whether
or not the oscilloscope operates in single or dual channel mode. More
Horizontal System
Real Time
Sampling
Rate
*2 GSa/s (half-channel interleaved)
1 GSa/s (per channel)
*On 4-Ch models, Ch1 and Ch2 are interleaved, and Ch3 and Ch4
are interleaved. “Half channel” operation means only Ch1 or Ch2
and/or only Ch3 or Ch4 is active.
Highest
Equivalent
Sampling
Rate
50 GSa/s
Measure
Display
Modes
MAIN, WINDOW, WINDOW ZOOM, ROLL, X-Y
Timebase
Accuracy
± 100 ppm measured over 1 ms interval
Horizontal
Scan Range
5 ns/div –
50 s/div
2.5 ns/div – 50 s/div 1 ns/div –
50 s/div
Scan Mode: 100 ms/div – 50 s/div (1-2.5-5 sequence)
Maximum
Memory
Length
(interleaved)
24,000 points**
(12000 points for dual channel operation)