Burkert Type 8630 - Manual (Page 130)

128 - 8630
P
ROFIBUS
DP
The following screen appears:
• Select Configuration ...
Example for a positioner
Settings in the configuration menu of the TOP Control Continuous:
ADDR: 3 PDI: PDO:
• PDI:POS • PDO:INP
• PDI:MODE • PDO:MODE
After starting COM Profibus and the setting of master and SPS information, one gets the following
screen:
Example 1 with COM Profibus V3.3
• Select CONTROLLER
• Set an element under the
control
• Set the 3rd address in the
menu address (without
image)
• Confirm with OK
• Select CONTROLLER family
• Select Type 8630