Burkert Type 8630 User Manual
Page 76
Advertising
74 - 8630
O
PERATION
AND
CONTROLLER
FUNCTIONS
SAFEPOS
Entering the safety position
Factory setting: 0 %
SAFEPOS
SPOS XXX
Enter
safety position (0 ... 100 %)
*
With the fast pressurize / fast vent variant, two valves are driven in each case to obtain faster
pressurizing and venting.
* When the safety position is 0 % or 100 %, the actuator will be fully vented or pressurized as soon as the safety position is
activated int he supplementary function
SIG-ERR or BIN-IN.
The safety position set is only moved to when a corresponding signal is present at the
binary input (for configuration see
BIN-IN), or on occurrence of a signal error (for
configuration see
SIG-ERR).
This function is executed only in the AUTOMATIC mode.
ATTENTION!
Advertising