Burkert Type 8630 - Manual (Page 62)

60 - 8630
O
PERATION AND CONTROLLER FUNCTIONS
➔ Select in the main menu the item ADDFUNCT.
➔ By pressing the MANUAL/AUTOMATIC key, enter the supplementary menu.
➔ With the arrow keys, select the desired supplementary function.
➔ By pressing the MANUAL/AUTOMATIC key, confirm addition of the supplementary function to the
main menu. The function is automatically marked with an asterisk (*).
➔ All marked functions are added to the main menu after confirmation of ENDFUNCT.
➔ In the main menu, enter the parameters for the supplementary functions.
Deletion of supplementary functions from the main menu
Addition of supplementary functions to the main menu
➔ ➔ ➔ ➔ ➔ 5 s To activate the configuration menu, press (in the process operating level), the MANUAL/
AUTOMATIC key for 5 seconds.
The configuration menu consists of a main and a supplementary menu. The main menu contains initially
the basic functions which are specified during first commissioning. The supplementary menu comprises
supplementary functions which may be reached via the menu item ADDFUNCT of the main menu.
Specification of device functions and parameters is possible only within the main menu. If needed, the
main menu may be augmented by additional functions and parameters from the supplementary menu,
which can then be specified.
➔ Select in the main menu the item ADDFUNCT.
➔ By pressing the MANUAL/AUTOMATIC key, enter the supplementary menu.
➔ With the arrow keys, select a supplementary function marked with (*).
➔ By pressing the MANUAL/AUTOMATIC key, confirm deletion of the supplementary function (the
asterisk (*) marking is deleted).
➔ After confirmation of ENDFUNCT, the supplementary function is deactivated and deleted from the
main menu.
NOTE By removing a function from the main menu, the settings previously made under this
function are again invalidated.
Numeric values are set in the menu items provided by pressing the keys „arrow up“ (increment value) or
„arrow down“ (decrement value) one or more times. In the case of 4-digit numbers, only the flashing digit
can be set with the arrow keys. By pressing the MANUAL/AUTOMATIC key, you can switch to the next
digit.
Setting of numeric values