Burkert Type 8630 - Manual (Page 69)

8630 - 67
O
PERATION AND
C
ONTROLLER
F
UNCTIONS
Inputsignal
(INP)
DIR.CMD
Sense of action or direction of the positioner setpoint
Factory setting: DIR.CRISE
With this supplementary function, you can set the sense of action between the input signal (INP) and
the setpoint position (CMD) of the actuator.
Direct sense of action
(e.g. 4 mA or 0 V
➔ ➔ ➔ ➔ ➔ 0 %,
20 mA or 5/10 V ➔ ➔ ➔ ➔ ➔ 100%)
Inverse sense of action
(e.g. 4 mA or 0 V
➔ ➔ ➔ ➔ ➔ 100%,
20 mA or 5/10 V ➔ ➔ ➔ ➔ ➔ 0%)
Setpoint
position
(CMD)