Hach-Lange SI794 P User Manual - Manual (Page 30)

30
Overview of configuration steps
PH/ORP PH
(GLAS EL/FEt EL ) GLAS EL
0-20 mA/4-20 mA 4-20 mA
xxxx 00.00 pH
xxxx 14.00 pH
Time averaging filter xxxx SEC 0 SEC
22 mA signal in the case of error ON / OFF OFF
Signal response during HOLD Last / Fix Last
Enter fixed value xxx.x mA 021.0 mA
out2 Output 2
o2. Select temperature unit °C / °F °C
Select temperature probe 100 Pt/1000 Pt/30NTC/
8.55NTC/3000B 1000 Pt
Select current range 0-20 mA/4-20 mA 4-20 mA
Enter current start xxx.x 000.0 °C
Enter current end xxx.x 0100.0 °C
Time averaging filter 0000 ... 0120 SEC) 0 SEC
22 mA signal for temp error ON / OFF OFF
Signal response during HOLD Last / Fix Last
Enter fixed value xxx.x mA 021.0 mA
tc. Temperature compensation
tc. Temp detection during meas Auto/man (man: xxx.x °C)
Temp detection during cal Auto/man (man: xxx.x °C)
Enter TC process medium xx.xx %/K 00.00%/K
CAL Calibration mode
CA. Select calibration mode BUF/MAN/DAT 06 BUF
Enter cal timer interval xxxx h 0000 h
Menu Code
out1 Output 1
o1. Select process variable
Select electrode type
Select current range
Enter current start
Enter current end
Choices Default