Hach-Lange SI794 P User Manual - Manual (Page 53)

53
LiMIT
(CtROL)
Code Display Action Choices
rL. Use of relays:
• Limit function (LiMIT)
• Controller (CtROL)
Select using .
Press enter to proceed.
Note: Selecting CtROL leads to
Ct. controller menu group.
Lo
(Hi)
For limit 1 function principle,
see page 55. Select using .
Press enter to proceed.
Limit 1 contact response
N/C: normally closed contact
N/O: normally open contact
Select using .
Press enter to proceed
N/C
(N/O)
Limit 1 setpoint
Select using , edit number
using . Press enter to proceed.
00.00 pH
( xx.xx pH)
Limit 1 hysteresis
Select using , edit number
using . Press enter to proceed.
00.50 pH
( xx.xx pH)
Limit 1 delay
The contact is activated with
delay (deactivated without delay)
Select using , edit number
using . Press enter to proceed.
0010 sec
( 0 ... 9999
sec)
L1.