Configuration – Hach-Lange SI794 P User Manual User Manual
Page 56
Advertising
56
Configuration
Controller (For description see Pg 84 and the following)
Setpoint / Neutral zone
Relay 1 menu group
Relay 2 menu group
L1.
L2.
Relay / Controller
rL.
Code Display
Menu group
Select menu item
Exit:
Press conf, then enter.
Controller setpoint
Enter neutral zone
(P) Controller gain
(I) Reset time T
R
(D) Rate time T
D
PLC: Pulse length
PFC: Pulse frequency
HOLD response
Ct.
Pulse length / Pulse
frequency controller
Advertising