Hach-Lange SI794 P User Manual - Manual (Page 39)

39
OFF
(ON)
Code Display Action Choices
o1. 22 mA signal for error message
Select using  key
Press enter to proceed
Output signal during HOLD
LAST: During HOLD the last
measured value is maintained at
the output
FIX: During HOLD a value (to be
entered) is maintained at the
output
Select using  key
Press enter to proceed
LAST
(FIX)
Only with FIX selected:
Enter current which is to flow at
the output during HOLD
Select position using key and
edit number using  key.
Press enter to proceed
21.0 mA
(00.0 ...
21.0 mA)
Output signal during HOLD:
Output current
[mA]
Output signal for HOLD
FIX setting = 21.0 mA
HOLD active
21
4
Output signal for HOLD
LAST setting
HOLD active