Hach-Lange SI794 P User Manual User Manual
Page 33
Advertising
33
Note: Characters represented in gray are blinking and can be edited.
Code Display
Action
Choices
o1.
Select configuration
(Press conf.)
Enter passcode “1200”
(Use to select the position, use
to edit the number. When the
display reads “1200”, press enter
to confirm.)
The transmitter goes to HOLD
mode. (HOLD icon is active, red
LED blinks when “HOLD ON” has
been configured.)
Select parameter pH/ORP
Select using key
Press enter to proceed
pH/ORP
Only with pH selected:
Select electrode type:
• Glass electrode
• ISFET electrode
Select using key
Press enter to proceed
Glass
(FEt EL)
After correct input a
welcome text (CONF) is
displayed for approx. 3 sec
Advertising