Hach-Lange SI794 P User Manual - Manual (Page 57)

57
01.00 pH
(xx.xx pH)
07.00 pH
(xx.xx pH)
Setpoint
Select using , edit number
using . Press enter to proceed.
Neutral zone (dead band)
Select using , edit number
using . Press enter to proceed.
Controller: P action
Select using , edit number
using . Press enter to proceed.
Code Display Action Choices
Ct.
0100 %
(xxxx %)
Controller: I action (reset time)
Select using , edit number
using . Press enter to proceed.
0000 sec
(xxxx sec)
Controller: D action (rate time)
Select using , edit number
using . Press enter to proceed.
0000 sec
(xxxx sec)
Pulse length / Pulse frequency
Select using .
Press enter to proceed.
PLC
(PFC)
PLC: Pulse length
Select using , edit number
using . Press enter to proceed.
0010 sec
(xxxx sec)
PFC: Pulse frequency
Select using , edit number
using . Press enter to proceed.
0060
/min
(xxxx /min )
Behavior during HOLD
Select using .
Press enter to proceed.
Y Last
(Y Off)