A/c charger assembly removal, A/c charger assembly removal -26 – ZOLL E Series Monitor Defibrillator Rev D User Manual
Page 136
Advertising
1. Remove cables from cable harnesses, and disconnect tie wrap
on the MFC signal cable.
2. Remove screw from A/C ground cable.
3. Disconnect A/C connector cable by pulling down on latch and
pull towards you. Remove cable from wire loom. Lift A/C charger
assembly out of the case.
E Series Service Manual
5-26
9650-1450-01 Rev. D
A/C Charger Assembly Removal
Advertising