ZOLL E Series Monitor Defibrillator Rev D - Manual (Page 25)

E Series Service Manual
9650-1450-01 Rev. D 1-15
7.0 Heart Rate Display Test
Tools Needed:
• ECG Cable (3 or 5 leads).
• QED 6 Defibrillator Analyzer.
Test Setup:
1. Turn the selector switch to MONITOR. Press LEAD button until “I” displays.
2. Connect the ECG leads to the QED 6 Defibrillator Analyzer.
3. Connect the ECG cable to the unit.
Do this... Verify that... Pass/Fail/NA
7.1 o o o Set the QED 6 Defibrillator Analyzer t o
120BPM.
The Heart Rate displays as 120 +/- 2 bpm
Record your results on the Maintenance Tests Checklist.