Communication board & pcmcia module removal, Communication board & pcmcia module removal -31, Communication board – ZOLL E Series Monitor Defibrillator Rev D User Manual
Page 141: Pcmcia module removal
Advertising
E Series Service Manual
9650-1450-01 Rev. D
5-31
Communication Board
1. Remove the 4 screws securing the communication board to the
housing.
2. Remove the screw that is securing the PCMCIA board to
the housing. Lift PCMCIA assembly straight out.
Note:
To remove the board tilt the side toward the PCMCIA assembly up,
and then lift out.
Note:
During reassembly, ensure that the isolator is installed on top of
communication board.
& PCMCIA Module Removal
Advertising