Connecting the co, Sampling lines – ZOLL X Series Monitor Defibrillator Rev H User Manual
Page 126
Advertising
C
HAPTER
9 M
ONITORING
CO2
9-4
www.zoll.com
9650-001355-01 Rev. H
Connecting the CO
2
Sampling Lines
To connect the FilterLine or Smart CapnoLine:
1. Slide open the X Series unit’s CO
2
inlet port cover.
2.
Put the fitting at the end of the sidestream tubing over the CO
2
inlet port connector.
3.
Turn the fitting clockwise to tighten.
Figure 9-1 Connecting the Sampling Line Connector to the CO
2
Inlet Port
Advertising